Description
Audio Clip
8 ohm and 16 ohm in stock
The Ascension A30, 30 watt guitar speaker, has been voiced to offer more crunch for classic vintage guitar tones.
Fitted with an Alnico magnet it provides a smoothness and warmth throughout its midrange and delivers the classic, shimmering alnico chime, detailed top-end coupled with a tight low-end punch that will give your sound new life. Clean tones are crisp, clear and articulate.
Best suited when used with single, 2×12 cabinets and various boutique amplifiers. The A30 can also be combined with our F30 driver for complimentary alternative sound.
| SPECIFICATIONS | |
|---|---|
| Series | Ascension |
| Nominal Chassis Diameter | 12 |
| Power Rating (AES) | 30 Watts |
| Frequency Range | 75Hz – 5kHz |
| Impedance | 8 / 16 Ω |
| Sensitivity | 100 dB |
| Magnet Weight | 1 Kg / 35.27 oz |
| Magnetic Gap Depth | 8 mm / 0.31” |
| Flux Density | 1.4 Tesla |
| Coil Winding Height | 10.7 mm / 0.42” |
| Voice Coil Diameter | 44.45 mm / 1.75” |
| Voice Coil Material | Copper |
| Former Material | Paper |
| Magnet Material | Alnico |
| Chassis Material | Pressed Steel |
| Cone Material | Paper |
| Front Gasket Material | Foam |
| Surround / Edge Termination | Paper |
| Dust Dome | Fabric |
| Connectors | Solder Tabs |
| Overall Diameter | 309 mm / 12.17” |
| Flange Height | 5 mm / 0.20” |
| Overall Depth | 166.5 mm / 6.56” |
| Magnet Structure Diameter | 102 mm / 4.02” |
| Gasket(s) Supplied | Front & Rear |
| Baffle Cut-out Diameter | 284 mm / 11.18” |
| Mounting Hole Information | 4 x ø8mm on 297 mm PCD |
| Nett Weight | 4.1 Kg / 9.04 lb |
